11 SERVICE WORK ON THE CHASSIS
11.17
11.18
11.19
56
Lubricating the steering head bearing
H02387-01
Removing the start number plate
W00195-10
Installing the start number plate
W00196-10
Guideline
Screw, top triple clamp
–
Check the steering head bearing play. (
Finishing work
–
Mount the handlebar cushion.
–
Remove the motorcycle from the lift stand. (
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated in the
course of removal and installation of the lower triple clamp.
–
1
Remove screw
.
–
Unhook the start number plate from the brake line and remove it.
–
Position the brake line in holders
–
Position the start number plate. Mount and tighten screw
The holding lugs engage in the fender.
M8
17 Nm (12.5 lbf ft)
p. 55)
p. 47)
(
p. 52)
(
p. 53)
A
on the start number plate.
1
.