Table of Contents
Advertisement
11 SERVICE WORK ON THE CHASSIS
11.8
11.9
11.10
50
Installing the engine guard
F03638-11
Removing the frame protector
W00203-10
Installing the frame protector
W00203-11
–
Position the engine guard on the frame.
–
1
Mount screws
, but do not tighten yet.
Guideline
Remaining screws,
chassis
–
2
Mount screws
with bushings, but do not tighten yet.
Guideline
Remaining screws,
chassis
The engine guard is directed evenly toward the front.
–
Tighten all the screws of the engine guard.
Guideline
Remaining screws,
chassis
–
Remove the cable ties.
–
1
Remove screws
with the bushings.
–
Take off the left frame protector.
–
Push the right frame protector to the front and take off at the bot-
tom.
–
Position the left frame protector.
–
Insert the right frame protector from below and push it to the rear.
–
1
Mount screws
with the bushings and tighten.
Guideline
Screw, frame protector
–
Secure the frame protector with cable ties.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
M5
3 Nm (2.2 lbf ft)
Advertisement
Table of Contents
