Adding A Nvr Using A Ddns Address - FLIR DIGIMERGE DNR316P1 Instruction Manual

7. Click + next to No Group.
8. Double-click the NVR.
9. Click-and-drag the NVR to the display area to view.

Adding a NVR using a DDNS address

If you have NVR systems with DDNS set up, you can add them to the CMS.
Prerequisites:
• Create a DDNS account. For details, see "Appendix D: Setting Up DDNS Service" on page 98.
• Enter the DDNS information into the NVR locally.
• Port forward the Client and HTTP ports (default: ports 80 and 35000) on the router.
To add a NVR using a DDNS address:
1. Click Config Manager>Device Manage.
Click-and-drag the NVR
to the display area to view
Click Config Manager
Click Device Manage
FLIR SyncroIP NVR Central Management Software
Click Device List
Click +
Double-click the NVR
43