Configuring Projects - FLIR DIGIMERGE DNR316P1 Instruction Manual

• Device: Click and drag the camera from the Device List in the main CMS window to the field
to add it.
• Stream Type: Select Main Stream or Extra Stream to view the substream.
Enter Task name
Select split-screen layout
Select display window
Drag camera from
Device List
Select Main Stream
or Extra Stream
Click Add
7. Click Add. Repeat Steps 6 & 7 to configure additional screens.
8. Click OK. Click OK to save changes.

Configuring Projects

Once you have multiple tasks set up, you can configure projects to automatically cycle through
them.
To configure a project:
1. Click Config Manager>Scheme Task Config.
2. Click Monitor Project.
Click Monitor Project
3. Click New.
4. Enter a Name for the project. You may not change the name after the project is created.
FLIR SyncroIP NVR Central Management Software
49