Connecting To Your System Using Ddns; Cms Software Or Mobile Apps; Internet Explorer - FLIR DIGIMERGE DNR316P1 Instruction Manual

Appendix D: Setting Up DDNS Service
• Ensure Enable is checked. The checkbox will be white when DDNS is enabled.
• Under Domain Name, enter the Domain Name from the confirmation email you received after
registering for DDNS.
• Under User ID, enter the User Name from the confirmation email.
• Under Password, enter the Password from the confirmation email.
7. Click OK.
8. Click Save.
NOTE: It may take between 10~15 minutes for the DDNS server to update with your new DDNS
address.

Connecting to your system using DDNS

NOTE: You must port forward ports on your router to NVR's IP address (by default, ports 35000
and 80) to connect to your system over the Internet.
Now that you have set up your system for DDNS, use the following address formats to connect:

CMS Software or Mobile Apps

tomsmith.myddns-flir.com
• For details on the CMS Software, see "FLIR SyncroIP NVR Central Management Software" on
page 40.
• For details on mobile apps, see "Mobile Connectivity" on page 62.

Internet Explorer

http://
http://tomsmith.myddns-flir.com:80
• For details, see "Remote Viewing on Internet Explorer" on page 58.
100
DDNS address
DDNS address
Colon
HTTP port number