Using Search Mode In Ie (Playback) - FLIR DIGIMERGE DNR316P1 Instruction Manual

Remote Viewing on Internet Explorer
• Local Play: Open recorded or back up video files (.dav) saved on the local computer.
• Refresh: Click this button to refresh monitor channel name.
3. Camera Controls:
NOTE: Manual Recordings are saved to
C:\PictureDownload
to use these functions.
4. Live View Toolbar:
Select image
quality
5. PTZ Controls
6. Color Settings: Use the sliders to adjust the brightness, contrast, saturation, and hue for the
selected camera.

Using Search Mode in IE (Playback)

You can access recorded video from your NVR using the Internet Explorer client.
To access recorded video from your NVR:
1. Click Search.
2. Configure the following search options:
• Type: Select the type of recording to search for.
• Begin Time/End Time: Select the start and end for your search.
• Channel: Select the channel you would like to search or select All.
• Main Stream: Check to search for main stream recordings.
• Substream: Check to search for Substream recordings. Substream recordings are lower
quality recordings that may be saved on the system to reduce the bandwidth required for
remote playback.
3. Click Search.
4. Under Multiple-channel Playback, select the channels you would like to playback.
60
Digital Zoom
(Click-and-drag
to select area)
C:\RecordDownload
. You must select Run as Administrator when you open Internet Explorer
Full-screen
Fluency/
Latency
Manual
Record
Snapshot Close
. Snapshots are saved to
Select display view