Installing A Firmware Upgrade Over The Internet - FLIR DIGIMERGE DNR316P1 Instruction Manual

Appendix E: Remote Firmware Upgrade
7. Click Upgrade. Wait for the upgrade to complete. Do not power off the system or disconnect
the power cable during upgrade. The system will restart when the upgrade is complete.
Check NVR's
Click Open and select firmware file
Click Upgrade

Installing a Firmware Upgrade Over the Internet

Prerequisites:
• Port forward the Client Port (default: 35000) on the NVR's local router.
• Obtain the public IP address of the NVR.
• Download a firmware upgrade from www.digimerge.com, if one is available. Extract the
contents.
To perform a firmware upgrade over the Internet:
1. Download the Config Tool from www.digimerge.com.
2. Extract the contents into a folder.
3. Open the folder and right-click ConfigTool.exe and Run as administrator.
4. Click Login.
5. Under IP Address, enter the public IP address of the NVR. Edit the User Name, Password, or
Port if these have been changed from the default values.
6. Click Login. The Config Tool logs in to the NVR.
7. Click System Upgrade.
8. Click Open. Select the firmware file (.bin).
102
Enter the NVR's public
IP address