Using The Quick Menu; Adjusting Color Settings - FLIR DIGIMERGE DNR316P1 Instruction Manual

Using the System

Using the Quick Menu

The Quick menu gives you access to the system's key functions. To access the Quick Menu,
right-click the screen during live view.
The Quick Menu has the following options:
• View: Select a camera in full-screen or select a multi-channel display.
• Pan/Tilt/Zoom: Access controls for PTZ cameras (not included).
• AutoFocus: If your camera has a mechanical focus lens, click to configure the zoom/focus
levels or activate auto focus. See "Adjusting Camera Zoom & Focus" on page 11.
• Color Setting: Configure color settings for IP cameras.
• Search: Search/playback recorded video. See "Search (Playback)" on page 14.
• Record: Open the Record menu to select manual recording options. See "Recording" on
page 24.
• Device Search: Open the Device Search menu to manage IP cameras.
• Alarm Output: Open the Alarm Output menu.
• Main Menu: Open the Main Menu. See "Using the Main Menu" on page 20.

Adjusting Color Settings

Use the Color Settings menu to adjust color settings for your IP cameras.
To adjust color settings:
1. Right-click on the channel you would like to configure and select Color Setting. Enter the
system password if prompted.
2. Adjust the Hue, Brightness, Contrast, and Saturation settings that the camera will use. To
enable custom Gain controls, check Gain and use the slider to configure the gain level.
8