Recording - FLIR DIGIMERGE DNR316P1 Instruction Manual

RECORDING

By default, the system is set to immediately record at startup from connected cameras. This is
called Continuous Recording. It is highly recommended to keep Continuous Recording on at all
times.
The system supports the following recording types:
• Continuous Recording: By default, all camera channels are enabled with Continuous
Recording. During Continuous Recording, the Record icon (
• Motion Recording: Cameras can be configured to record and mark events when motion is
detected. When motion is detected, the Motion icon (
NOTE: You must enable motion recording in the Schedule before the system will record motion
events. For details, see "Schedule" on page 24.
• Alarm Recording: Cameras can be configured to record when external alarm devices are
triggered.
13
) appears in the channel.
) appears in the channel.