Using The Virtual Keyboard; Adjusting Camera Zoom & Focus - FLIR DIGIMERGE DNR316P1 Instruction Manual

Using the Virtual Keyboard

The Virtual Keyboard is used to input text or numeric values in certain menus.
Adjusting Camera Zoom & Focus
If your camera has a motorized lens, you can control the zoom/focus level or activate auto focus
from the NVR.
To adjust the camera's zoom focus:
1. Double-click on the channel where the motorized lens camera is connected.
2. Right-click and then click AutoFocus. Log into the system using the admin account (default
User Name is admin and Password is 000000).
3. Adjust the zoom and focus using the following options:
• Use the sliders to adjust the Zoom WIDE or Focus NEAR settings for the camera.
TIP: Hover the mouse over the sliders and use the mouse wheel to adjust by 1% at a time.
• Click the AutoFocus button to automatically focus the camera at the current zoom level.
• Click Reset to return the camera to the default zoom and focus levels.
• Click Refresh to refresh the settings shown on the NVR if someone has used the manual lens
controls on the camera.
4. Right-click to exit and save changes.
Backspace
Enter capital letters
Confirm entry
Using the System
11