Setting The Time - FLIR DIGIMERGE DNR316P1 Instruction Manual

Setting the Time

SETTING THE TIME
It is highly recommended to set the time on the system prior to doing any
recording.
To set the date and time:
1. In the main viewing mode, right-click and click Main Menu. Log into the system using the
admin account (default User Name is admin and Password is 000000).
2. Click Setting>General.
3. Enter the current date (MM DD YYYY) and time (HH MM SS) under System Time.
4. Click Save.
NOTE: To configure Daylight Savings Time see "General" on page 23. To configure NTP, see
"Configuring NTP" on page 26.
12
Set the date and time
Click Save