Advertisement
Using the Mouse
1. Left-Button:
• Click to open the Navigation Bar.
• During split-screen display mode: Double-click an
individual channel to view it in full-screen. Double-click
again to return to the split-screen display mode.
• While navigating menus: Click to open a menu option.
2. Right-Button:
• During Live View: Right-click anywhere on the screen to
open the Quick Menu.
• Within system menus: Right-click to exit menus.
3. Scroll-Wheel:
• Use to change menu options.
Adding Cameras from the LAN
NOTE:
Please visit
www.digimerge.com
for a list of compatible IP cameras.
1.
Connect the camera to a router or switch on
5.
If the Status indicator is green, the camera
the same network as the NVR.
is connected and no further configuration is
required. Click OK to save changes.
2.
Right-click and select Device Search. Log
in using the admin account (Default User Name:
6.
If the Status indicator is red, click
admin; Default Password: 000000).
Update the following information, as needed.
3.
Click IP Search.
4.
Check the camera(s) you would like to add
and click Add.
NOTE:
the default username, password, or ports used.
7.
Click OK. Click OK again to save changes.
Quick Connection Guide
Setting the Date & Time
1.
In the main viewing mode, right-click and click
1
2
Main Menu. If needed, log into the system using the
3
admin account (Default User Name: admin; Default
Password: 000000).
2.
Click Setting>General.
3.
Enter the current date (MM DD YYYY) and time
(HH MM SS) under System Time. Set the date and
time. Click Save.
.
4.
Click Save.
Manufacturer: Select the manufacturer of
your IP camera.
User: Enter the camera's user name.
Password: Enter the camera's password.
HTTP Port: Enter the camera's HTTP Port.
NOTE:
See the included manual on CD for details on
RTSP Port: Enter the camera's RTSP Port.
configuring Daylight Savings Time and Network Time Protocol.
See the manual for your IP camera for details on
DNR200V Series
Network Video Surveillance Recorder
Searching & Playing Back Video
1.
From live view, right-click and then click Search. If needed, log
in using the admin account (Default User Name: admin; Default
Password: 000000).
2.
Use the calendar on the right to select the day to playback.
3.
Use the drop-down menus to select the channels you would like
to playback. Click the display options (
playback multiple channels simultaneously.
4.
Click inside the video bar to select the playback time.
Set the date
and time
Click Save
) to
Select the day
to playback
Select channels
to playback
Click inside the bar to
select a playback time
DNR200V Series Quick Connection Guide - English - R2
1-21032013
Advertisement
