FLIR DNR400 Series Quick Mobile Manual

Before You Start:
1A
iPhone
a
Install the free FLIR Cloud™ app from the App Store.
Tap the FLIR Cloud™ icon to open the app.
Tap Sign up and enter your email address and password to
b
create a new account.
c
Tap
d
Configure the following:
Tap Scan QR Code and line up the QR code on
1
the top of the NVR using the camera on your
iPhone.
1
2
Device ID: xxxxxxxxxxx
OR under Device ID, manually enter the
3
Device ID printed on the label.
4
Name: Choose a name for your system of your
2
5
choice.
3 Client Port: Enter the Client Port (default:
35000).
Username: Enter the NVR's User Name
4
(default: admin).
Password: Enter the NVR's Password
5
(default: 000000).
Tap Connect. You will be prompted to change the NVR
e
password.
Enter a new 6 character password and tap OK. This password
f
will be used to log on to your system from now on.
g
The app opens in Live View and streams video from all
connected cameras.
DNR400 Series
Quick Mobile Guide
• Make sure you have a router and • Connect your NVR to your router
high-speed Internet access (not
included).
1B
a
Install the free FLIR Cloud™ app from the App Store.
Tap the FLIR Cloud™ icon to open the app.
Tap Sign up and enter your email address and password to
b
create a new account.
c
Then tap +
d
Configure the following:
EXAMPLE
Tap Scan QR Code and line up the QR code on
1
the top of the NVR using the camera on your
iPhone.
Device ID: xxxxxxxxxxx
OR under Device ID, manually enter the
Device ID printed on the label.
2 Name: Choose a name for your system of your
choice.
3 Client Port: Enter the Client Port (default:
35000).
Username: Enter the NVR's User Name
4
(default: admin).
Password: Enter the NVR's Password
5
(default: 000000).
Tap Connect. You will be prompted to change the NVR
e
password.
Enter a new 6 character password and tap OK. This password
f
will be used to log on to your system from now on.
g
The app opens in Live View and streams video from all
connected cameras.
Congratulations! You can now view video from your cameras on your smartphone or tablet.
• Upgrade your NVR firmware and
using an Ethernet cable (see the client software or mobile app to the
Quick Connection Guide for details). latest versions.
iPad
Tap
Then tap +
EXAMPLE
1
2
3
4
5
• Please note that an upload speed
of 2 Mbps is required for remote
video streaming (3 Mbps and above
recommended). Up to 3 devices may
connect to the system at the same time.
1C
Android
Install the free FLIR Cloud™ app from the Google
a
Play Store. Tap the FLIR Cloud™ icon to open the
app.
Tap Sign up and enter your email address and password to
b
create a new account.
c
Tap
d
Configure the following:
1 Tap Scan QR Code and line up the QR code on the
top of the NVR using the camera on your phone or
tablet.
1
2
Device ID: xxxxxxxxxxx
OR under Device ID, manually enter the Device ID
printed on the label. 3
4
Name: Choose a name for your system of your
2
choice.
5
Client Port: Enter the Client Port (default: 35000).
3
4 Username: Enter the NVR's User Name
(default: admin).
Password: Enter the NVR's Password
5
(default: 000000).
Tap Connect. You will be prompted to change the NVR
e
password.
Enter a new 6 character password and tap OK. This password
f
will be used to log on to your system from now on.
g
The app opens in Live View and streams video from all
connected cameras.
Then tap +
EXAMPLE