FLIR DIGIMERGE DNR316P1 Instruction Manual page 37

Connecting to your system
After you have port forwarded the required
port, created a DDNS account, and enabled
DDNS on your system, you must enter the
DDNS URL into Internet Explorer to access
your NVR.
The DDNS URL must include http:// , the
name of your DDNS URL, followed by a
colon, then the HTTP port of your NVR.
For example:
http://tomsmith.
DDNS URL
NOTE: If you change your HTTP port
number (port 80) to a different port, you
must enter your port number after the
DDNS address.
Configuring Email Alerts
You can configure the system to send out email
alerts for motion detection or other events.
NOTE: To send out motion detection alerts,
you must enable the Send Email option for
motion detection on each camera. For
details, see "Configuring Motion Detection
Events" on page 28.
To configure Email Alerts:
1. From live view, right-click and select Main
Menu. Log in if prompted.
:80
myddns-flir.com
HTTP Port
2. Click Setting>Network.
3. Click Network Setting.
4. Check Email. Double-click Email.
5. Configure the following:
• SMTP Server: Enter the SMTP server
address.
• Port: Enter the port used by the SMTP
server.
• Anonymous: Check if your server supports
anonymous log ins. Otherwise, leave this
unchecked.
• User Name: Enter the SMTP user name.
• Password: Enter the SMTP password.
Using the Main Menu
Click Network
Setting
Check Email
and then
double-click
Email
27