Front Panel - FLIR DIGIMERGE DNR316P1 Instruction Manual

FRONT PANEL

1 2
1. USB Port: Connect a USB mouse (included) or connect a USB flash drive (not included) for
data backup or firmware upgrades.
2. IR: Not supported.
3. Channel Indicators: Glow when camera is connected to the corresponding channel.
4. Playback Controls:
• Pause/Play: In live view, press to enter playback mode. Press to play/pause playback.
• Reverse: Press to reverse playback/pause playback.
• Fast: Press to increase playback speed.
• Next: Press to skip to next video.
• Previous: Press to skip to previous video.
• Slow: Press for slow playback.
5. Function Buttons:
• REC: Press to open manual recording controls.
• FN: Performs special functions in some menus.
• SHIFT: During text input, press to switch input types.
• ESC: In menus, press to go back / exit menus. In playback, press to return to live view.
6. Directional Buttons:
• ENTER: From live view, press once to open the System Information screen; press twice to
open the Main Menu. In menus, press to confirm menu options.
• Directional Buttons: Press to move cursor in menus. In live view, press up to change split
screen layout; press left / right to select channels when single-channel mode is selected.
7. Power Button: Press and hold to power off the system. Press to power the system back on.
8. IR Receiver: IR receiver for the remote control. Keep the IR receiver clear from obstructions. 
LED Indicators:
• POWER: Glows to indicate the system is on.
• HDD: Glows to indicate hard drive is in normal state. Turns off when there is a hard drive error.
• NET: Glows when network is in normal state. Turns off for network error.
3 4 5 6 7 8
3