Appendix E: Remote Firmware Upgrade; Installing A Firmware Upgrade Over The Lan - FLIR DIGIMERGE DNR316P1 Instruction Manual

APPENDIX E: REMOTE FIRMWARE
UPGRADE
To perform a firmware upgrade over the LAN or Internet, a Config Tool is provided on the CD or
www.digimerge.com. In an effort to continuously improve the functionality of our products,
firmware upgrades are available as a free download on www.digimerge.com, as they are released.
NOTE: The Config Tool is supported on PC only. You may also upgrade the firmware using the
NVR's local menus (see "Updating Firmware" on page 21).

Installing a Firmware Upgrade Over the LAN

Prerequisites:
• Connect your NVR to a router or switch on your network.
• Download a firmware upgrade from www.digimerge.com, if one is available. Extract the
contents.
To perform a firmware upgrade over the LAN:
1. Download the Config Tool from www.digimerge.com.
2. Extract the contents into a folder.
3. Open the folder and right-click ConfigTool.exe and Run as administrator. If a Windows
Firewall warning appears, click Allow Access. The Config Tool scans your LAN for NVR's.
4. Click Upgrade.
Click Upgrade
5. Check any NVR's you would like to upgrade.
6. Click Open. Select the upgrade firmware file (.bin).

Appendix E: Remote Firmware Upgrade

101