Operator Settings; Metric/Standard Fold Selection; Standard Fold Override - Formax FD 38Xi Operator's Manual

OPERATOR SETTINGS

A number of operator settings can be adjusted to personalize the FD 386 / FD 38Xi. This includes changing between
standard and metric settings, number of test sheets, Fold and Stacker Override, and Standard Fold Override.
This section will review each setting and how to adjust them. If needed, there is a Default Settings option that will reset to
factory settings. To advance to the Operator Settings Screen press the Tool icon
Fig. 35
Operator Settings Icon
1.
Standard / Metric Settings
2.
3.
1. From the Operator Settings screen (Fig. 36) press the
measurement setting icon
between settings. The icon highlights in blue is the se-
lected setting. By changing this setting the paper sizes
will change from standard to metric or vice versa.
Press the home icon
Invoice
1.
Screen.
Flyer
2.
Brochure
3.
(Fig. 37) to change
to return to the Home
mm inch
Fig. 36
Operator Settings Screen
Standard Fold Override: Adjust standard fold
mm inch
and stacker settings
Anulación de plegado estándar: ajuste la
con guración estándar de plegado y apilador
Standard Fold Override: Passen Sie die
Standardeinstellungen für Falz und Stapler an
Fig. 37
Standard / Metric Icon
Standard Fold Override: Adjust standard fold
settings
Anulación de plegado estándar: ajuste la
con guración de plegado estándar
Standard Fold Override: Passen Sie die
Standard Fold-Einstellungen an
Standard Fold Override: Adjust standard fold
and stacker settings
Anulación de plegado estándar: ajuste la
16
con guración estándar de plegado y apilador
Standard Fold Override: Passen Sie die
on the Home screen.
Default
settings
Restabl
pliegues
Standar
Werksei