Managing The Heating, Cooling And Domestic Hot Water Production; Switching The Central Heating On/Off; Forcing Cooling; Periods Of Absence Or Going On Holiday - DeDietrich MIT-M /E Installation, User And Service Manual

9.5

Managing the heating, cooling and domestic hot water production

Tab.117
Parameter
Start date holiday
End date holiday
Wished room temperature during holiday
Reset
9.6

Monitoring the energy consumption

7756241 - v02 - 19062020
DHW reduced setpoint: used in the Scheduling, Holiday and
Antifrostmodes
You can change these set point temperature settings to adapt them to
your needs.
1. Select the
Off
2. Select Comfort DHW set point to modify this set point.
3. Select Zone configuration > Domestic Hot Water Setpoints > Reduced
DHW set point to modify this set point.
9.5.1

Switching the central heating on/off

Your appliance will automatically deactivate the heating function and
switch to cooling mode when the temperature exceeds 22 °C (factory
setting). However, you can manually switch off the heating function for all
circuits to save energy during the summer period, for example.
Important
If the heating function is shut off, then the cooling will also be shut
off.
1. Select the
23.5
2. Select CH function on.
3. Select the desired value:
Off to stop the heating function.
On to switch the heating function on again.
9.5.2

Forcing cooling

Your appliance will automatically switch to cooling mode when the outdoor
temperature exceeds 22 °C (factory setting). However, you can force
cooling mode at any time, regardless of the outdoor temperature.
1. Select the
2. Select Force summer mode.
3. Select On.
9.5.3

Periods of absence or going on holiday

If you will be absent for several weeks, you can reduce the room
temperature and domestic hot water temperature in order to save energy.
To do this, activate the Holiday operating mode for all zones, including for
domestic hot water.
1. Select the
2. Set the following parameters:
Description
Set the date and time for the start of the absence period.
Set the date and time for the end of the absence period.
Set the desired room temperature for the absence period
Restart or cancel the holiday programme
If your installation is equipped with an energy meter, you can monitor your
energy consumption.
DHW tank icon.
Air Src Heat pump icon.
icon.
Holiday Mode icon.
9 Operation
MIT-M 91