Stopping Domestic Hot Water Production; Shutting Down The Cooling Function - DeDietrich ALEZIO S V200 User Manual

5 Operation
Fig.25
MW-5000135-3
Fig.26
Fig.27
24 MIV-4S V200
5.3.2
1. Go to stop mode by pressing the
2. Select domestic hot water production mode pressing the
3. Confirm by pressing the
MW-5000136-3
4. Select domestic hot water production shut-down by pressing the
MW-5000028-4
5. Confirm by pressing the
6. Go back to the main display by pressing the
5.3.3
1. Access the
2. Confirm access by pressing the
3. Select CIRCA or CIRCB by pressing the
4. Confirm the selection by pressing the
5. Select TP.C by pressing the
6. Confirm the selection by pressing the
7. Modify the timer program to stop cooling.

Stopping domestic hot water production

Important
Domestic hot water production can be managed via the TIME
PROG sub-menu dedicated to timer programming.
key.
The screen displays:
The frost protection function continues to run.
Production of domestic hot water has been shut down.
Important
Press the key to restart the appliance: the screen will
display .
Important
The display disappears after a few seconds of inactivity.

Shutting down the cooling function

Important
If the heating function is shut off, then the cooling will also be shut
off.
menu.
For more information, see
Switching off the heating, page 23
key.
key.
.
key.

key.
key.
or key.
key.
or keys.
key.
7682850 - v04 - 02082019
key.