Forcing Domestic Hot Water Production; Setting The Contrast And Lighting On The Display - DeDietrich AWHP MIT-IN iSystem User Manual

AWHP MIT-IN iSystem
Menu r
Parameter Description
AUTOMATIQUE The domestic hot water comfort ranges are determined by the timer programme.
Domestic hot water comfort mode is forced until the time indicated or all the time (7/7). Present time + 1 hour
COMFORT
0 2 4 6 8
E 1
2
1
D
2
bar
# F

% $
AUTO
J
I
STD
User level - Menu #SETTING
Parameter Adjustment range Description
CONTRAST DISP.
BACK LIGHT COMFORT
ECO
06/09/2012 - 300027618-001-01
MODE
C002268-A
10 12 14 16 18 20 22 24
SUNDAY 11:45
!
:
<
C002219-D-04
Adjusting the display contrast.
The screen is illuminated continuously in
daytime periods.
The screen is illuminated for 2 minutes
whenever pressed.
4.3.3.

Forcing domestic hot water production

To force domestic hot water production, proceed as follows:
1. Press the r key.
2. To select the desired parameter, turn the rotary button.
3. To modify the parameter, press the rotary button.
To go back to the previous display, press the key j .
4. To modify the parameter, turn the rotary button.
5. To confirm, press the rotary button.
To cancel, press key h .
4.3.4. Setting the contrast and lighting on the
display
1. To access user level: Press the > key.
2. Select the menu #SETTING.
Turn the rotary button to scroll through the menus or
4
modify a value.
Press the rotary button to access the selected menu
4
or confirm a value modification.
¼ For a detailed explanation of menu browsing, refer
to the chapter: "Browsing in the menus", page 12.
3. Set the following parameters:
4. Operating the appliance
Factory setting
Factory setting Customer setting
ECO
18