Table of Contents
Advertisement
5 Installation
5
Installation
5.1
Installation regulations
5.2
Standard delivery
Tab.17
Package
Outdoor unit
Indoor unit
20
MIT-M
Warning
The components used for the connection to the cold water supply
must comply with the prevailing standards and regulations in the
country concerned.
Pursuant to Article L. 113-3 of the French Consumer Code, the installation
of equipment must be done by a certified operator whenever the
refrigerant load is in excess of two kilograms or when a refrigerant
connection is necessary (the case with split systems, even when fitted with
a quick coupling device).
Regulations for France: residential buildings
Standard DTU 65–16: Installation of heat pumps
Standard DTU 65-17: Hot water radiator heating system
Standard DTU 65-14: Installation of hot water underfloor heating.
Standard DTU 65-11: Safety devices for central heating installations
relating to the building
Set of recommendations: Hot water central heating systems - Book
3114 from the Centre Scientifique et Technique du Bâtiment (Scientific
and Technical Centre for Building).
Local Sanitary Regulations (RSD)
For appliances connected to the electricity network: Standard NF C
15-100 - Low voltage electrical installations.
Regulations for France: establishments open to the general public
Safety regulations against fire and panic in establishments open to the
general public: Articles CH - Heating, ventilation, refrigeration, air
conditioning and production of steam and domestic hot water.
Instructions specific to each type of establishment open to the general
public (hospitals, stores, etc.).
Contents
An outdoor unit
A manual
An indoor unit
An outdoor temperature sensor
An accessories bag containing:
hoses,
gaskets
etc.
An installation, user and service manual
An outdoor unit connection manual
A user manual for the outdoor unit spare parts
Terms of warranty
A quick user guide
A list of important points for installation and commissioning
7756241 - v02 - 19062020
Advertisement
Table of Contents
