Allowing Sufficient Space For The Indoor Module; Fitting The Assembly Rail - DeDietrich MIT-M /E Installation, User And Service Manual

5 Installation
Fig.12
Fig.13
22 MIT-M
MW-1001196-1
2
3
1
3
MW-1001197-1
5.5.2

Allowing sufficient space for the indoor module

Allow sufficient space around the heat pump indoor module to ensure
adequate access and facilitate maintenance.
5.5.3

Fitting the assembly rail

1. Drill 2 holes with a diameter of 6 mm.
Important
Extra holes are provided in case one or other of the standard
locating holes prevents the correct location of the plug.
2. Put the plugs in place.
3. Fix the mounting rail to the wall using the hexagonal head screws
provided for this purpose. Set the level using a spirit level.
7756241 - v02 - 19062020