Advertisement
81.
Locate Horizontal Gable Trims for
both front and rear of shed. Position equally
over Gable and Wall seam. Attach each piece
with 6 - 1 1/2" Finishing Nails.
82.
Attach Facia Detail Plates and
Pentagon Detail Plates to cover seams
where Facia and Trim pieces come together.
Secure each with 4 - 1 1/2" Finishing Nails.
Vertical Door Stops
83.
Attach Interior Vertical and Horizontal
Door Stops to door framing from inside of
shed. Use 4 - 2" screws to secure each stop.
Stops should overlap door by approx. 1/2".
Toll Free 1-888-658-1658
Parts (Step 81)
Horizontal Gable Trims
(1/2" x 4 1/2" x 42") x 2
(1/2" x 4 1/2" x 45 1/4") x 4
Parts (Step 82)
Pentagon Detail Plates
(9 1/2" x 7 1/2") x 2
Facia Detail Plates
(8" x 5 1/2") x 4
Horizontal Door Stop
Parts (Step 83)
Door Stops
(1/2" x 2 1/2" x 72") x 2
(1/2" x 2 1/2" x 36") x 1
www.outdoorlivingtoday.com
Page 44
Hardware (Step 81)
N1 - 1 1/2" Finishing Nails
x 36 total
Parts (Step 82)
Gable Detail Plates
(8" x 4 1/2") x 4
Hardware (Step 82)
N1 - 1 1/2" Finishing Nails
x 36 total
Hardware (Step 83)
S3 - 2" Screws
x 12 total
sales@outdoorlivingtoday.com
Advertisement
