58.
Drill pilot holes with 1/8" bit through Polygal Panel and Polygal Support Cleats. Once
aligned, with 6 - 1" screws, secure panel to Polygal Support Cleats. Polygal is delicate, tight-
en screws a half turn at a time so screws are flush with top of Polygal Panel. Use 3 - 3/4"
screws to secure Polygal Panel to underside of Roof Plywood.
59.
Position and secure remaining Polygal Panels as per Steps 57 - 58.With a caulking gun,
apply silicone to seal gaps between Rafters and Polygal Panels. Apply silicone down each side
of Rafter. Use liberal amounts to properly seal.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 33
sales@outdoorlivingtoday.com