Advertisement
11.
With Floor Plywood pieces in position, attach with 1 1/4" screws. Use screws every 16"
(approximately 120 total). The plywood is cut slightly smaller than floor framing. Keep plywood seams
tight.
Important: Check to confirm that your
floor is level prior to proceeding to the
next step of wall assembly.
B. Wall Section
Double Window Wall Panels (4)
F&R Riser Plates (4)
F&R Top Plates (6)
Gable Half Walls (4)
Solid Wall Panel With
Extra Vertical Studs (1)
Window Wall Panels (4)
Toll Free 1-888-658-1658
Hint: Use a chalk
line to mark location
of floor joists to
determine
placement.
Door Jamb (1)
Door Header Riser (1)
Door Header w/ Spacers (1)
Narrow Wall Panel (1)
www.outdoorlivingtoday.com
Page 12
screw
Drip Edge w/ Bevel Siding (1)
Solid Wall Panels (4)
Side Riser Plates (4)
Side Top Plates (6)
sales@outdoorlivingtoday.com
Advertisement
