Advertisement
Front
Important: If Gable framing does not line up with Rafters, remove temporary 2"
screws from Gable framing. Re align gable and then secure.
45.
With both Rafter Sections correctly aligned, secure Gable Framing to
both outside Rafters with 8 - 2" screws per side at top and with 8 - 2" screws
into Top Wall Plates at bottom.
Front
46.
Start by attaching one Gusset onto the mid-
dle Rafters as illustrated. Attach only 1 - 2" screw
per side now. Important: Pilot hole Gussets to
prevent splitting.
Important: Before attaching remaining Gussets, recheck the inside-to-inside wall measure-
ment are done as in Step 41. Use a level to check they are square.
Toll Free 1-888-658-1658
Rear
Gusset sit 1/4" below
Rafter.
Parts (Steps 46 - 47)
(3/4" x 80" x 19 3/4") x 4
www.outdoorlivingtoday.com
Page 27
Hardware (Steps 45)
Hardware (Steps 46-47)
Gussets
S3 - 2" Screws
sales@outdoorlivingtoday.com
S3 - 2" Screws
x 32 total
x 40 total
Advertisement
