Advertisement
50.
Identify Roof Panels. There are 4 Long Roof Panels and 4
Short Roof Panels. Start on the long side of roof (side without
polygal support cleats). Lift the long left panel onto roof such that
the roof plywood is 1/8" from end of roof rafter..
51.
Position Panel so roof plywood sits evenly on doubled up Rafters. Screw Panel to Rafters with
9 - 1 1/4" screws. Lift up and place a Long Center Roof Panel on Rafters. Position evenly on Rafters.
52.
Position Center Roof Panel so plywood is 1/8" from end of Rafters as per Step 50. From side-
to-side, make sure Roof Panel is sitting equally on rafters. When positioned correctly, screw down with
9 - 1 1/4" screws into Rafters.
Toll Free 1-888-658-1658
Long Roof Panel
Hardware (Step 50 - 54)
S2 - 1 1/4" Screws
x 36 total
www.outdoorlivingtoday.com
Page 30
Roof Plywood 1/8"
from rafter end.
Parts (Step 50 - 54)
Long L&R Roof Panels
(5/8" x 48" x 81 1/2") x 2
Long Center Roof Panels
(5/8" x 45 1/2" x 81 1/2") x 2
45 1/2" wide
Center Roof Panel
sales@outdoorlivingtoday.com
Advertisement
