Download
Share
Print this page
  1. Manuals
  2. Brands
  3. OLT Manuals
  4. Garden Houses
  5. SpaceSaver SS124-SLIDER-PLY-AK
  6. Assembly manual

OLT SpaceSaver SS124-SLIDER-PLY-AK Assembly Manual

12x4 sliding doors - plywood roof - ak siding
Hide thumbs

Advertisement

Quick Links

Download this manual
Stock Code:
SS124-SLIDER-PLY-AK
Roof Area: 55 sq ft.
Thank you for purchasing a
12x4 SpaceSaver Shed with
Sliding Doors. Please take the
time to identify all the parts prior
to assembly.
Safety Points and Other Considerations
Our products are built for use based on
proper installation on level ground and
normal residential use. Please follow the
instruction manual when building your
shed and retain the manual for future
maintenance purposes.
Customers are responsible for ensuring
a solid, level, well-draining site for
construction.
Please check with your local municipal
or county by-laws before ordering this
product to confirm it complies with
building codes.
In the event of a missing or broken piece, call the Outdoor Living Today Customer Support Line @ 1-888-658-1658 with-
in 30 days of the delivery of your purchase. It is our commitment to you to courier replacement parts, free of charge,
within 10 business days of this notification. Replacement parts will not be provided free of charge after the 30 day
grace period.
All structures purchased from Outdoor Living Today are covered for a period of one year for defects in manufacturing
and workmanship. Costs incurred for customer installations are not included.
Failure to use supplied parts included in this kit could result in poor product performance and may void your warranty.
Please contact Outdoor Living Today's Customer Toll Free Line if you plan to deviate from our written instructions.
1-888-658-1658
12x4 SpaceSaver
Sliding Doors - Plywood Roof - AK Siding
Assembly Manual
- Snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it
is advisable to sweep snow off roof frequently.
- If the product is elevated, any structural and building code requirements are solely
the customer's responsibility, and should be abided by.
- In areas with high or gusty wind conditions, it is advisable to install the structure
securely to the ground.
- Have a regular maintenance plan to ensure screws, doors, windows and parts are
tightly affixed.
Customer agrees to hold Outdoor Living Today and any Authorized
Dealers free of any liability for improper installation, maintenance and
repair.
www.outdoorlivingtoday.com
Page 1
Version #1.12
Apr 4, 2022
sales@outdoorlivingtoday.com

Advertisement

loading

Related Manuals for OLT SpaceSaver SS124-SLIDER-PLY-AK

Summary of Contents for OLT SpaceSaver SS124-SLIDER-PLY-AK

  • Page 1 12x4 SpaceSaver Sliding Doors - Plywood Roof - AK Siding Assembly Manual Stock Code: Version #1.12 SS124-SLIDER-PLY-AK Apr 4, 2022 Roof Area: 55 sq ft. Thank you for purchasing a 12x4 SpaceSaver Shed with Sliding Doors. Please take the time to identify all the parts prior to assembly.
  • Page 2 What to do before my Shed arrives? • Become familiar with this assembly manual and determine if you can complete the project yourself or will require a professional contractor. • One helper is recommended to assist in constructing your shed. It generally takes two people over two days to assemble a shed.
  • Page 3 Foundation Types for 12x4 Garden Shed 141 1/2” 141 1/2” 45 1/2” 45 1/2” Concrete Foundation Floor Frame Completed Foundation Concrete Slab Foundation: - Slab must be at least the same size as assembled floor frame (45 1/2” x 141 1/2”) or larger. - 6”...
  • Page 4 1. Floor Section Parts List - Pages 4 and 5 Steps Floors 1A: 2 - 45 ½” x 70 ¾” - Floor Frames 1B: 4 - 1 ½” x 3 ½” x 67 3/4” - Floor Joists 1C: 2 - 1 ½” x 3 ½” x 45 ½” - Floor Runners Short 1CC: 5 - 1 ½”...

  • Page 5: Tools Required

    4. Trim & Miscellaneous Section Cont. Steps Facia 48-52 4Q: 2 - ½” x 5 ½” x 54 1/8” - Side Facia (Angle Cut Ends) 4R: 4 - ½” x 5 ½” x 50 ½” - Front and Rear Facia - Left/Right 4S: 2 - ½”...
  • Page 6 Regular Maintenance & Tips to prolong the life of your shed. Before/During Assembly: 1.) Paint each face and edge of your plywood floor with a latex exterior paint. 2.) Caulk wall seams if gaps appear. 3.) Caulk around window framing. 4.) Caulk perimeter between floor plywood and bottom wall plate.

  • Page 7: Floor Section

    1. Floor Section Exploded view of all parts necessary to complete Floor Section. Identify all parts prior to starting. Note: Floor Footprint is 141 1/2” wide x 45 1/2” deep. Floor Frames - 2pcs. Plywood Floor - 2pcs. (Part 1A) (Part 1D) Center Floor Joists - 4pcs.
  • Page 8 Parts Hardware Position 1C - Floor Runners - Short on each 1C - Floor Runners - Short S1 - 2 1/2” Screws side of the completed floor frame. Runners should (1 1/2” x 3 1/2” x 45 1/2”) x 2 x 8 total be flush with corners but not overhanging.
  • Page 9 Advice: Use chalk line to mark location of mid joists for interior screws. Hardware With Plywood positioned correctly on floor framing, attach with 1 1/4” Screws. S2 - 1 1/4” Screws Use screws every 16” around perimeter of each floor section and 3 screws x 40 total (approx.) through each mid joists.
  • Page 10 Ensure bottom plate is flush side-to-side You can find BR1 - with wall studs Square Drive Bit for the screws in with the Hardware Kit Bag. Bottom Wall Plate Parts Hardware Carefully lay 2A - Side/Rear Wall Panels face 2A - Side/Rear Wall Panels S1 - 2 1/2”...
  • Page 11 Optional - Caulking seams will help prevent moisture from entering at seam. Caulking not Pilot Hole included in kit. first. Hardware (Steps 10 - 12) Position rear solid wall into place on plywood floor. Butt both vertical wall S1 - 2 1/2” Screws studs of side and rear walls together and attach with 3 - 2 1/2”...
  • Page 12 Wall panel will sit flush with floor framing. Do Not Attach Walls To Floor Until Step 23 Complete remaining side wall attachment as per Steps 10 - 11. Ensure bottom plate is flush side-to-side with wall studs Parts Carefully lay 2C - Front Wall Panels face down. Position and attach 2C - Front Wall Panels 2BB - Bottom Wall Plates to bottom of wall studs of each wall panel with (35”...
  • Page 13 Step to front and top. Align flush Door Header outside with overhangs wall siding. inside wall framing by 1/2” Parts (Step 14 - 15) Hardware (Step 14 - 15) Position 2D - Door Header - Short on top 2D - Door Headers - Short S4 - 3”...
  • Page 14 Top Siding Pc. Parts Position 2F - Top Triangular Siding Piece onto 2G - Angle Wall Extenders - L/R 2G - Angle Wall Extender and align as shown above. Attach with (2G - 45 1/2” wide) x 2 3 - 1 1/2” Finishing Nails to top frame of extender wall. There are 2F - Top Triangular Siding Piece left/right top siding pieces.
  • Page 15 Complete opposite Angled Wall Extender positioning and attachment as per Step 18. Cleat protects overhanging siding on upper walls from damage. Please remove before Protective installing. cleat Parts (Steps 20 - 21) Hardware (Steps 20 - 21) Place 2H - Rear Extender Walls top framing 2H - Rear Extender Walls S1 - 2 1/2”...
  • Page 16 Parts Attach 2I & 2J - Horizontal Wall Cleats to Wall Extender 2I - Horizontal Wall Cleat - Long bottom framing and Rear Wall top framing so that cleat is flush with (3/4” x 3 1/2” x 84”) x 1 extender framing.
  • Page 17 3. Rafter and Roof Section Exploded view of all parts necessary to complete the Rafter and Roof Section. Identify all parts prior to starting. -Center Large & Small Roof Plywood Panels Outside Large & Small Roof Plywood Panels - 2 pcs (Parts 3G & 3I) -4 pcs (Parts 3F&...
  • Page 18 Note: We recommend you drill a 1/8” pilot hole for each screw, to avoid Screw Rear Soffits to splitting wood. The hole depth should be equal to 3/4 the length of screw. Rafters with 2 - 1 1/4” Screws per rafter end. Screw Front Soffits to Rafters with 2 - 2 1/2”...

  • Page 19: Side View

    Rafter ends vertical. Side View Carefully flip completed Rafter Section over so Front Soffit is facing the front and place on SpaceSaver walls. Note: Double check that your Rafter Section is positioned correctly by ensuring the ends of the Rafters are sloped vertically as shown above. Rafter sits on framing Position completed Rafter Section on top of walls.
  • Page 20 90° Metal Brackets Hardware With Rafter Section correctly aligned, secure rafters to walls Y2 - 90° Metal Bracket x 4 total using 2 - 90° Metal Brackets per side. Attach each brackets with S2 - 1 1/4” Screws x 16 total 4 - 1 1/4”...
  • Page 21 50” wide x 5 3/4” deep. tight Position a Small Outside Plywood Roof Panel tight against the rear of the front plywood. Position with same side overhang. Attach with 6 - 1 1/4” Screws as per Step 30. Locate Center and remaining Outside Roof Panels. Position Center Large Panel (45 1/2” wide) on rafters and attach as per Steps 30 - 31.
  • Page 22 Parts Center Facia Nailing Strips onto outside of each plywood panel 3J - Facia Nailing Strips flush on edge. Attach with 3 - 1 1/4” Screws per piece, evenly spaced. (3/4” x 3/4” x 51”) x 2 The Facia Nailing Strip provides for a greater nailing surface later when Hardware you attach Side Facia.
  • Page 23 Parts (Steps 35 - 36) Attach 4A - Bottom Skirting around the base of the shed. 4A - Side/Rear Bottom Skirting - Bevel Skirting will hide floor framing. Start with side skirting pieces (3/4” x 4 1/2” x 45 1/4”) x 5 first and attach with 4 - 1 1/2”...
  • Page 24 Gap will be covered. Parts Position and attach 4C - Front Corner Filler Trim with 4C - Front Corner Filler Trim 4 - 1 1/2” Finishing Nails per piece. Filler trims won’t be visible (1/2” x 2 1/2” x 38”) x 4 because they serve as nailing strips for the Corner Trims which Hardware will be attached later.
  • Page 25 A wood clamp may be helpful Front Soffit to hold the track in place while attaching to Soffit. Door 3/8” Header 3/8” Gap between Track and Door Header. Extra piece of lap siding can be used as a spacer. Parts Position 4E - Aluminum Door Tracks on bottom of Front Soffits, 4E - Aluminum Door Track spaced approximately 3/8”...
  • Page 26 Twist Roller Cart onto bolt. After doors are hung, you may need to adjust this until doors hang straight up and down at equal height. Parts Locate all four Y35 - Roller Assemblies. Before attaching to top of 4F - Sliding Doors doors, assemble the units as shown above.
  • Page 27 1/4” Gap Lower Door Track 1 5/8” Parts Locate 4H - Door Tracks and 4J - Door Stops. Middle Door Stop 4H - Lower Door Track should be centered on shed and outer Door Stops should be 1 1/2” from (1 1/2”...
  • Page 28 Door Stop and Track Cover are flush Parts Hardware Locate 4I - Door Track Covers. Lineup so Track 4I - Lower Door Track Cover S1 - 2 1/2” Screws Covers are flush with Door Stops. This creates an (3/4” x 3 1/2” x 44 1/4”) x 3 x 12 total enclosure so doors can not slide out of the track.
  • Page 29 Left Side Right Side Door Door Door Flange attaches to Left Side Door. Flush with inside of door frame. Parts Position 4G - Interior Door Flange on the rear of the left side 4G - Interior Door Flange door (when viewed from the front of the shed). Ensure flange is flush (3/4”...
  • Page 30 tight underneath soffit. Parts Place 4M & 4N - Front Corner Trims in front corner and align as 4M - Front Corner Trims illustrated above. Do a dry run prior to attaching to achieve best fit. Start (1/2” x 5 1/2” x 78 1/2”) x 2 with 5 1/2”...
  • Page 31 Parts Hardware Attach 4P - Rear Middle Trims where wall 4P - Rear Middle Trim N1 - 1 1/2” Finishing Nails panels come together at rear seam. Attach with (1/2” x 2 1/2” x 88 3/4”) x 2 x 16 total 8 - 1 1/2”...
  • Page 32 Attach other Front and Side Facia to opposite corner as per Step 48. Small gaps may occur. Attach 4S - Front Facia - Center to rafter ends as shown above. Small gaps may occur between the Center and Left/Right Facia, but these will be covered by Facia Detail Plates in Step 52. Attach with 2 - 1 1/2”...
  • Page 33 Parts Hardware Attach 4T - Facia Detail Plates to cover 4T - Facia Detail Plates N1 - 1 1/2” Finishing Nails seams where Front Facia pieces meet. Secure (5 1/2” high) x 2 x 8 total with 4 - 1 1/2” Finishing Nails per piece. caulk in siding gap at top.
  • Page 34 Trim dado sits in flange. Parts Position 4W - Window Trim around window doing a dry run 4W - Window Trim Kit x 2 first and attach with 4 - 1 1/2” Finishing Nails per piece. Window (Top pc - 24 1/16”) x 1- Angle Ends trim has a small dado on reverse face.
  • Page 35 Congratulations on assembling your 12x4 SpaceSaver Shed with Sliding Doors! (Plywood Roof Model) Note: Our Sheds are shipped as unfinished products. If exposed to the elements, the western red cedar lumber will weather to a silvery-gray color. If you prefer to keep the cedar lumber looking closer to the original color, we suggest that you treat the wood with a good oil base wood stain.