Advertisement
Outside (2)
5 1/2" wide
71.
Locate all Polygal Ridge Caps (4 Mid, 2 Outside, and
3 Center). Starting form the outsides, position both 5 1/2" wide
caps so the long edge with pre-attached facia nailing strip is
below Plywood roof panel. When correctly aligned, attach
Caps to center of outside Rafter with 4 - 1 1/2" Finishing
Nails. Use a straight edge to align Cap with Plywood Roof
Panels. See above.
72.
Position and attach Mid Ridge Caps evenly spaced on single Rafters. Align top to bot-
tom as per Step 71. Secure each piece with 4 1 1/2" Finishing Nails.
73.
Position and attach Center Ridge Caps evenly spaced on double Rafters. Align top to
bottom as per Step 72. Secure each piece with 4 1 1/2" Finishing Nails.
Toll Free 1-888-658-1658
Mid (4)
2 1/2" wide
Center (3)
4 1/2" wide
Hardware (Step 71 - 73)
N1 - 1 1/2" Finishing Nails
x 36 total
www.outdoorlivingtoday.com
Page 40
Polygal Ridge Cap
overhangs Rafter by
approx. 1/4"
Parts (Step 71 - 73)
Outside Polygal Ridge Caps
(1/2" x 5 1/2" x 44") x 2
Center Polygal Ridge Caps
(1/2" x 4 1/2" x 44") x 3
Mid Polygal Ridge Caps
(1/2" x 2 1/2" x 44") x 4
sales@outdoorlivingtoday.com
Advertisement
