Advertisement
1/4" Gap
Important: Pre drill pilot holes
to prevent splitting!
49.
Position Polygal Support Cleats alongside
Rafters. Leave a 1/4" gap down from top of Rafter. The
shorter Cleat is for the Rafters with a Gusset attached.
Secure each Cleat to Rafter with 4 - 1 1/4" screws.
Ensure to pre-drill pilot holes to avoid splitting Complete
remaining Polygal Support Cleats.
D. Roof Section
Long Roof Panels (4)
2 Outside, 2 Center
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 29
Parts (Step 49)
Polygal Support Cleats Short
(3/4" x 3/4" x 38") x 4
Polygal Support Cleats Long
(3/4" x 3/4" x 48") x 12
Hardware (Step 49)
S2 - 1 1/4" Screws
x 64 total
Short Roof Panels (4)
2 Outside, 2 Center
Polygal Panels (8)
sales@outdoorlivingtoday.com
Advertisement
