Flashing overhangs
outside of rear wall
32.
Place completed Gable Section so framing sits flush with the inside of the Top Wall Plate. It
should also be centered side-to-side on the Top Wall Plate. Gable Flashing overhangs wall on the
outside. Temporarily attach Gables to Top Wall Plate with 4 - 2" screws . Gables may need slight
adjustment in Step 45 when attachment will be completed with an additional 6 screws. Screw from
the bottom of Gable framing down into Top Wall Plate and Wall Framing. Complete Gable posi-
tioning and attachment on the other side. Hint: Use a straight edge to check the angle of the Gable
framing and Top Plate. Both angles should lineup at .°. Attach Gable tip to shed with 2 - 1 1/2"
Finishing Nails as shown above.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 21
sales@outdoorlivingtoday.com