Advertisement
20.
Lineup Narrow Wall so flush with each other on the
outside. Attach Studs together with 3 - 2 1/2" screws as
per Step 14. Note: Narrow Wall is 73" high (9" shorter
than other walls).
21.
Locate Vertical Door Jamb and position flush
against right wall panel stud. The Jamb is 3 1/2" wide
and will sit flush to outside of wall siding. When posi-
tioned correctly, secure Jamb using 4 - 2 1/2" screws.
22.
Position and attach Door Header Riser to
Door Jamb and Narrow Wall Panel top framing.
Header should fit flush with Door Jamb and
Outside of Narrow Wall Siding. Attach with 4 - 2
1/2" screws.
Toll Free 1-888-658-1658
Vertical Door Jamb
(1 1/2" x 3 3/8" x 73")
Door Header Riser
(1 1/2" x 2 1/2" x 45 1/2")
www.outdoorlivingtoday.com
Page 16
Parts (Step 20)
Narrow Wall Panel
(12" x 73") x 1
Part (Step 21)
Hardware (Step 21)
x 1
Part (Step 22)
x 1
sales@outdoorlivingtoday.com
Hardware (Step 20)
S1 - 2 1/2" Screws
x 3 total
Door Jamb sits
flush with wall
framing.
S1 - 2 1/2" Screws
x 4 total
Hardware (Step 22)
S1 - 2 1/2" Screws
x 4 total
Advertisement
