Advertisement
74.
Attach Facia Cleat Short centered on underside of
Polygal Side of roof plywood, flush to edge. Attach Facia
Cleat Long to underside of roof on Non-Polygal side, flush
edge to edge. Repeat this step on rear of shed. Fasten each
cleat with 3 - 1 1/4" screws per piece..
Expert Advice: Do a dry run by lining up Front, Rear and Side Facia to confirm positioning prior
to attaching
75.
Attach Front and Rear Facia (angle cut on ends), to
Facia Cleats on Non-Polygal Roof side, with 10 - 1 1/2"
Finishing Nails per piece. Line up Facia so Facia ends line
up with Rafter ends.
Toll Free 1-888-658-1658
Hardware (Step 74)
S2 - 1 1/4" Screws
x 18 total
www.outdoorlivingtoday.com
Page 41
Parts (Step 74)
Facia Cleat Short
(3/4" x 1 1/2" x 36 1/2") x 2
Facia Cleat Long
(3/4" x 1 1/2" x 40") x 4
Hardware (Step 75, 77)
N1 - 1 1/2" Finishing Nails
x 40 total
Parts (Step 75, 77)
F&R Facia (angled ends)
(3/4" x 5 1/2" x 81 1/4") x 4
sales@outdoorlivingtoday.com
Advertisement
