Advertisement
Edge without
Floor Runner
Wide Floor
Runner
8.
With a helper, flip remaining floor section over onto your foundation. Edge of frame without floor
runner should land on wide floor runner.
9.
To attach floor sections together attach each 75" Frame to 66 1/2" Frame with 3 - 2 1/2" screws
(36 Total).Use 2 screws on both sides to attach horizontally. On the 66 1/2" Frame side toenail one
screw into the Wide Floor Runner.
45 1/2"
75"
10.
Position Plywood Floor pieces (8) on
top of completed Floor Joists. Plywood will
sit slightly back from edge of Floor Joist
Framing.
Toll Free 1-888-658-1658
45 1/2"
66 1/2"
Parts (Steps 10 - 11)
Floor Plywood - Large
(5/8" x 45 1/2" x 75") x 4
Floor Plywood - Small
(5/8" x 45 1/2" x 66 1/2") x 4
www.outdoorlivingtoday.com
Page 11
Hardware (Steps 10 - 11)
S2 - 1 1/4" Screws
x 120 total
sales@outdoorlivingtoday.com
Advertisement
