Advertisement
53.
Locate 2nd Center Roof Panel and position so plywood is 1/8" from end of Rafters as per Step
50. From side-to-side, make sure Roof Panel is sitting equally on rafters. When positioned correctly,
screw down with 9 - 1 1/4" screws into Rafters.
54.
Lift up and place remaining Long Outside Roof Panel on Rafters. With Outside Roof Panel
centered on rafter and aligned as per Steps 50 - 51, screw panel down with 9 - 1 1/4" screws.
55.
Locate Short Right Roof Panel. Lift and place panel on polygal
side of roof. Position Short Right Roof Panel equally on seam of dou-
bled up Rafter as per Step 51. Align Roof Panel at top so even with long
panel at peak. Reach through opening in Rafters to attach. When posi-
tioned correctly, screw down with 6 - 1 1/4" screws into Rafters as illus-
trated above. Hint: work from inside of shed to position and secure
Polygal Side Roof Panels.
Toll Free 1-888-658-1658
Hardware (Step 55 - 56)
S1 - 2 1/2" Screws
x 24 total
www.outdoorlivingtoday.com
Page 31
Small Gap between roof
panels at peak
Parts (Step 55 - 56)
Short L&R Roof Panels
(5/8" x 48" x 37 1/2") x 2
Short Center Roof Panels
(5/8" x 45 1/2" x 37 1/2") x 2
sales@outdoorlivingtoday.com
Advertisement
