Advertisement
Slight gap. Top Trim over-
laps Bottom Trim to pre-
vent water from getting in
64.
Place the Top Dutch Door panel into place and
gap top and bottom trims on the outside about 1/8"
apart/ On the inside, horizontal door frames should be
about 1/4" apart. Use a shim once agin to help you.
Attach hinges to trim with 2" Black Headed Screws
provided.
65.
Attach Door Handle, Exterior Drop Latch and Interior
Barrel Bolt to door. Handle is positioned on top door, Drop
Latch on bottom door, and Interior Barrel Bolt (silver) on top
door stud. Attach Black Drop Latch as illustrated above with 4 -
3/4" Black Screws. Note how female part of Drop Latch is posi-
tioned higher than male part. Do a dry run first to position Drop
Latch correctly. Important: Drill pilot holes with 1/8" drill bit prior
to securing to prevent wood from splitting.
Toll Free 1-888-658-1658
1/4" gap on inside.
Parts (Step 64)
Shim Shingles
www.outdoorlivingtoday.com
Page 37
Hardware (Step 64)
Dutch Door
SB2 - 2" Black Screws
(Top ) x 1
(Bottom) x 1
Hardware (Step 65)
SB1 - 3/4" Black Screws
x 16 total
Y3 - Black Handle
Y4 - Black Drop Latch
Y5 - Silver Barrel Bolt
sales@outdoorlivingtoday.com
x 12 total
x1
x1
x1
Advertisement
