Advertisement
14.
Position rear Window Wall Panel into place on plywood floor. Butt both vertical wall studs of side
and rear walls together and attach with 3 - 2 1/2" screws. Screw at the bottom, middle and top of
stud to secure properly.
Important: Rear
Center Solid Wall
Panel has 3 studs.
15.
With the corner wall attachment complete, position a Rear Solid Wall Panel With Extra
Vertical Studs so bottom 2x3 wall framing is sitting flush with outside floor frame. Wall siding should
overhang floor by approximately 1/2". Attach rear wall panel studs together as per Step 14.
16.
Position the final Rear Panel on the floor
(Window Wall Panel). Position vertical wall
studs together and attach as per Step 14.
Toll Free 1-888-658-1658
Optional:
Small bead of
Caulk on wall
frame first.
www.outdoorlivingtoday.com
2x3 wall framing flush with
outside of floor frame.
Important: Do not
attach walls to floor
until Step 26
Page 14
Rear Window Wall
Side Solid Wall
sales@outdoorlivingtoday.com
Advertisement
