Advertisement
27.
Position and attach F & R Riser Plates on
top of Front and Rear Wall Frames. attach with
4 - 2 1/2" screws each. Complete both front and
rear of shed.
28.
Position and attach Side Riser Plates with
6 - 2" screws per piece. Complete both sides of
shed.
29.
Position and attach Front & Rear Top
Plates.There are two pieces with angle cut ends
and one straight piece per side. Attach with 4 - 1
1/4" screws per piece. Complete Front and Rear
Toll Free 1-888-658-1658
Parts (Steps 27)
F&R Riser Plates
(1 1/2" x 2 1/2" x 70 3/4")
Parts (Steps 28)
Side Riser Plates
(1 1/2" x 2 1/2" x 88 1/2")
Parts (Steps 29)
F&R Top Plates Angle
(3/4" x 2 1/2" x 45") x 4
F&R Top Plates Straight
(3/4" x 2 1/2" x 51 1/2") x 2
www.outdoorlivingtoday.com
Page 19
Hardware (Steps 27)
S1 - 2 1/2" Screws
x 4
Hardware (Steps 28)
S3 - 2" Screws
x 4
Hardware (Steps 29)
S2 - 1 1/4" Screws
sales@outdoorlivingtoday.com
x 16 total
x 24 total
x 24 total
Advertisement
