Rear of Shed
60.
Attach Bottom Skirting - Bevel around the base of the
shed. Skirting will hide floor framing. Gaps on outside will be cov-
ered by trim pieces later. Start with front and rear skirting pieces
first and attach with 4 - 1 1/2" finishing nails per piece.
61.
Position Narrow Door Trim on left side of door opening and
one Door Trim on right side of door. Right side will sit flush with
Door Jamb. Left side will sit flush on edge of Narrow Wall. Do a
dry run with the Horizontal Gable Trim from Step 81 to determine
vertical location of right trim, left trim will sit below Drip Edge
installed in Step 25. Attach with 8 - 1 1/2" Finishing Nails per
piece.
Toll Free 1-888-658-1658
Rear of Shed
Vertical position determined
by Horizontal Gable trims.
www.outdoorlivingtoday.com
Page 35
Side of Shed
Hardware (Step 60)
1 1/2" - Finishing Nails
x 56 total
Parts (Step 60)
Bottom Skirting-Bevel
(1/2" x 4 1/2" x 45 1/4") x 14
Hardware (Step 61)
1 1/2" - Finishing Nails
x 16 total
Parts (Step 61)
Narrow Door Trim
(1/2" x 2 1/2" x 79") x 1
Door Trim
(1/2" x 3 1/2" x 85") x 1
sales@outdoorlivingtoday.com