Advertisement
56.
Repeat Steps 52 - 54 to attach remaining panels on short roof side. Align evenly at roof peak.
Hardware (Steps 57 - 59)
57.
Installation of 8 Polygal Panels is next. Start by removing protec-
SS1 - 1" Screws
tive plastic layer from each panel. Exterior/interior side of protective poly-
x 72 total
gal film is printed on film, be sure to note the side and install accordingly.
Parts (Steps 57 - 59)
Slide panel up between Rafters so it rests on Polygal Support Cleats.
Polygal Panels
From the inside, carefully slide end of Polygal Panel underneath roof.
(48" long) x 8
Position Polygal Panel equally between Rafters. Polygal Panel will
overhang end of Rafter by 1/2".
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
sales@outdoorlivingtoday.com
Page 32
Advertisement
