Advertisement
Completed Ridge Board
34.
Lay out 12 Rafters, 2 Soffits and the
completed Ridge Board from Step 33 on level
ground as shown. Double up Rafters as illus-
trated. Screw doubled up Rafters together with
3 - 2 1/2" screws. Note: completed rafter sec-
tion will be flipped over in Step 38.
Completed Ridge Board
2 - 2" Screws / Rafter
45.5"
20.5"
35.
Attach completed Ridge Board to ends of both outside Rafters with 2 - 2" screws per end.
Measure and position interior Rafters as illustrated above. When positioned correctly, attach Ridge
Board to remaining Rafters with 2 - 2" screws per rafter end. Important: Pilot Hole Ridge Board to
prevent splitting.
Toll Free 1-888-658-1658
2 1/2" Screws into Doubled up Rafters
45.5"
20.5"
20.5"
20.5"
www.outdoorlivingtoday.com
Soffits
Parts (Steps 34 - 37)
Ridge Boards
(3/4" x 9 1/4" x 45 1/2") x 2
(3/4" x 9 1/4" x 91") x 3
Rafters
(1 1/2" x 3 1/2" x 80 7/8") x 24
Soffits
(1/2" x 4 1/2" x 91") x 4
Rafter
182"
45.5"
20.5"
20.5"
Page 23
Important: Pilot
hole Ridge Board
to prevent splitting
Hardware (Steps 34 - 37)
S1 - 2 1/2" Screws
x 18 total
S3 - 2" Screws
x 48 total
S2 - 1 1/4" Screws
x 48 total
Important:
Measure 20 1/2"
spacing accurate-
ly to accomodate
Polygal Panels.
See Step 66.
Expert Advice:
Use Polygal Panel
to confirm correct
width
45.5"
20.5"
20.5"
sales@outdoorlivingtoday.com
Advertisement
