Opening A Screen; Library Status Information - Quantum P4000 User Manual

Table 16 GUI
Components
Opening a Screen2
Library Status
Information
2
Overview Tapes
Screen Screen
Status display Inventory
display
• Tape drives
• Tape
• Activity
drives
• Load port
• Storage
bins
• Load port
• Transport
(CHM)
*These screens are password protected.
To open one of the four main screens, touch the desired tab at the top of
the GUI. The
Overview
Operator and Service screens require a password.
Once the desired screen appears on the GUI, you can view information or
press buttons to execute commands and open other screens.
Some information about the library firmware version, security status, and
library status can be found on the left side of the GUI.
• Company logo—displays a company information screen when
pressed, as well as the application level and boot block level.
• System state display—shows the current state of the library (system on-
line, system off-line, system stopped, door open, and so on).
Quantum P4000 and P7000 Libraries User's Guide
Chapter 2 Basic Library Operations
Operator Screen*
Configure
• Configure Library
• Configure Options
• Control
• Move Cartridges
• Inventory Tapes
• Calibrate Library
• Unload Drive
• Unload Imp/Exp
(CHM)
and screens are accessible to any user. The
Tapes
Using the GUI
Service Screen*
Reports
• Statistics
• Actuator
• SysTest Results
• Auto Clean
• Tests
• SysTest Library
• Miscellaneous
• Initialize
Nonvol Stats
• Initialize
Nonvol Config
• Change
Password
45