View Event Log; Firmware Revision - Quantum ValueLoader DLT VS160 User Manual

ValueLoader Administration
Retrieving Information About the ValueLoader

View Event Log

3

Firmware Revision

40 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
1 From the Home screen or main menu, press the
appears on the top line of the LCD screen. Press the
Information
button to access the available options.
2 Press the or
[+]
screen.
The LCD screen displays the total cycle count.
3 Press the
[Cancel]
This option provides access to the most recent ValueLoader errors and
events (see table 5
1 From the Home screen or main menu, press the
appears on the top line of the LCD screen. Press the
Information
button to access the available options.
2 Press the or
[+]
screen. The LCD screen also displays the quantity of errors and
events currently stored in the event log.
3 Press the
[Enter]
4 Press the or
[+]
5 Press
[Cancel]
This option displays the revision of the firmware currently installed in
3
the ValueLoader.
Note: The tape drive and ValueLoader firmware are a single image,
but displays as three firmware numbers on the front panel.
To use this option, follow these steps:
1 From the Home screen or main menu, press the
appears on the top line of the LCD screen. Press the
Information
button to access the available options.
button until
[–] Cycle Count
button when done.
on page 57 for a description of error codes).
button until
[–] View Event Log
button to access the most recently logged event.
button to display each event in the log.
[–]
when done.
or button until
[+] [–]
[Enter]
appears on the LCD
or button until
[+] [–]
[Enter]
appears on the LCD
or button until
[+] [–]
[Enter]