Creating A New Partition - Quantum DXi3500 Quick Start Manual

Creating a New Partition

Figure 28 Add Partition Screen
Partition information
Deduplication state
Available tape
cartridges
Move to selected
tape cartridges
9 Click to continue.
Yes
You are warned that erasing the tape cartridges will destroy any data on the tape
cartridges.
10 Click to continue.
Yes
The is deleted.
Default Partition
11 Click to continue.
OK
Continue with Creating a New Partition
After the default partition has been deleted, you can now create a new partition.
0
To create a new partition:
1 Click from the
Add VTL
The screen displays (see
Add Partition
2 Enter the following
Partition
a Enter the
Partition Name
b Select the
Type of Library
Refer to your backup application documentation when choosing a library
Note:
type. Select a library presentation that is supported by your backup
application.
Creating a Partition
tab on the screen.
Configuration
figure 28).
information:
.
emulation, the default selection is
DXi3500 and DXi5500
.
Quantum DXi
32