Table of Contents
Advertisement
Library Status
2
Information
Figure 16 Library
Status Indicators
2
Exiting a Screen
Some information about the library firmware version, security
status, and library status can be found on the left side of the GUI.
Company logo —displays a company information screen when
•
pressed , as well as the application level and boot block level .
System state display —shows the current state of the library
•
(system on-line, system off-line, system stopped, door open,
and so on).
Lock icon —shows the current security level at the touch screen
•
GUI. Five security levels are available: service (S), operator (O),
user (U), import only (I), and locked (L).
attributes of each security level.
Company logo
ATL
P R O D U C T S
System
state
System
display
Off-line
Standby
Load Port
Lock
U
icon
Stop
To exit any screen, press the Back or Home button.
While the command is executing, the touch screen GUI displays a
Command In Progress dialog box with an Abort button. Pressing
Abort cancels the command and stops the ongoing operation.
ATL P2000 Series Automated Tape Library User's Guide
Chapter 2 Basic Library Operations
Using the Touch Screen GUI
Back
Forward
Overview
Tapes
ATL
P R O D U C T S
Service
http:/www.atlp.com/cust.html
Help: (USA) + 949-477-7924
Help in USA: 800-284-5101
BBS: (USA) + 949-477-7736
email: atlhelp@atlp.com
Revision: Application: 2.01
Revision: Boot Block: 1:11
Table 6
describes the
Home
Operator
P 2 0 0 0
S E R I E S
29
Advertisement
Table of Contents
