Table of Contents
Advertisement
Figure 46 Installing
the Horizontal
Carriage Restraint
Secure the vertical belt with a tie wrap or clamp.
c
Rotate the extension axis assembly 90 degrees.
d
Place the vertical carriage restraint.
e
Install the two screws that secure the vertical carriage
f
restraint to the horizontal carriage assembly. Torque the
screws to 70 in-lbs.
Install the screw that secures the vertical carriage restraint
g
to the vertical carriage assembly.
Remove the tie wrap or clamp from the vertical belt and
h
gently lower the vertical carriage.
Install the horizontal carriage restraint (see
5
Move the vertical carriage assembly to the right hand end
a
of the horizontal axis.
Place the horizontal carriage restraint and install the screw
b
that secures it to the floor of the library.
Install the two screws that secure the horizontal carriage
c
restraint to the horizontal carriage assembly.
ATL P2000 Series Automated Tape Library User's Guide
Appendix B Relocating the Library
Preparing the Library for Relocation
figure
46):
Horizontal
carriage
restraint
85
Advertisement
Table of Contents
