Appendix B Relocating The Library - Quantum P2000 Series User Manual

Appendix B
Relocating the Library
This appendix explains how to relocate the P2000 library. As used
in this appendix, the term relocate means either to ship the library
or simply to move it to a nearby location (for example, from one
area in a building to another).
The instructions in this appendix are divided into the following
sections:
Checking the new installation site
•
Preparing the library for relocation
•
Crating the library
•
Preparing the library for operation
•
To ship the library or move it using a motor vehicle (for example,
truck or forklift) follow all of the instructions in this appendix.
To move the library to a new location within the same building or
facility, follow all instructions in this appendix except for those
found in "Crating the Library" on page
Note: These procedures require the original packing materials
of the library. If you do not have the original packing
materials, contact the ATL Customer Support
Department.
Caution: Moving or shipping the library without proper
packing materials can result in damage to library
components.
ATL P2000 Series Automated Tape Library User's Guide

Appendix B Relocating the Library

90.
B
81