Table of Contents
Advertisement
Appendix B Relocating the Library
Preparing the Library for Relocation
Figure 50 Installing
the Gripper Restraint
Screw
Load Port
2
Shipping Plate
Disconnecting
2
Library Cables
88
The load port is located in the front door of the library.
Attach the cardboard and shipping plate to the load port.
a
Insert the bolts and washers that secure the plate to the load
b
port and secure them using the screws provided during the
unpacking procedure (see
To disconnect library cables:
Disconnect SCSI cables and terminators.
1
Disconnect the power cord from the outlet and the power
2
distribution assembly of the library.
Pack all cables with other library accessories.
3
ATL P2000 Series Automated Tape Library User's Guide
figure
51).
Advertisement
Table of Contents
