Table of Contents
Advertisement
Appendix B Relocating the Library
Preparing the Library for Relocation
Figure 47 Pivoting
Gripper Restraint into
Position
86
Install the gripper restraint:
6
Slide the gripper assembly away from the vertical axis until
a
the gripper assembly is fully extended and the gripper
restraint disengages from the follower guide.
Pivot the gripper restraint into place until it interlocks with
b
the motor, spring post, and follower guide (see
The gripper restraint should now be parallel to the follower
guide.
Slide the gripper assembly and gripper restraint toward the
c
vertical axis (see
Pivot into position to interlock components
Gripper assembly
fully extended
ATL P2000 Series Automated Tape Library User's Guide
figure 48
and
figure
Gripper restraint
figure
47).
49).
Follower guide
Advertisement
Table of Contents
