Element Numbering Convention - Quantum P2000 Series User Manual

Element
Numbering
1
Convention
The library stores tape cartridges in the following locations:
100 storage bins on the back wall
•
Up to 92 storage bins on inside of the front door
•
One load port
•
8 bins - two stationary LTO load port shelf bin modules (4
•
bin shelves each) are built into the load port assembly
12 bins - DLT and SDLT tape cartridges use two removeable
•
6-cartridge magazines
If the library is configured with both DLT and LTO tape
•
drives, stationary LTO load port shelf bin modules are used
Up to 10 tape drives
•
Figure 1 shows the storage bin, load port bin, and tape drive
numbering conventions. These conventions are used by the library
touch screen graphical user interface (touch screen GUI) and the
diagnostic software program.
ATL P2000 Series Automated Tape Library User's Guide
Chapter 1 Library Description
Overview
3